CEM B-CN marine centrifugal pump
Centrifugal electric pumps made in BRONZE widely used in the nautical sector to transfer and/or deliver fresh water and sea water to all the plants where a large flow rate is needed such as: air conditioning, cooling and circulation etc.
CONSTRUCTION FEATURES
- Pump body: BRONZE
- Motor support: BRONZE
- Impeller: BRONZE
- Shaft: AISI 316 Stainless steel
- Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof)
See below models and performances
- Description
- Reviews (0)
Description
Centrifugal electric pumps made in BRONZE widely used in the nautical sector to transfer and/or deliver fresh water and sea water to all the plants where a large flow rate is needed such as: air conditioning, cooling and circulation etc.
PERFORMANCES
|
Model |
Material |
Voltage |
Power |
Absorption |
Giri/min. |
Max. delivery |
Max. head |
|
|
HP |
kW |
|||||||
|
B-CN 32/125 |
Bronzo |
230M |
1,5 |
1,1 |
7,4 |
2800 |
250 |
23 |
|
230÷400T |
1,5 |
1,1 |
4,7÷2,7 |
2800 |
250 |
|
||
|
B-CN 40/125 A |
Bronzo |
230M |
1,5 |
1,1 |
7,4 |
2800 |
550 |
14 |
|
230÷400T |
1,5 |
1,1 |
5÷2,9 |
2800 |
550 |
14 |
||
|
B-CN 40/125 B |
Bronzo |
230÷400T |
3 |
2,2 |
9,2÷5,3 |
2800 |
700 |
22 |
|
B-CN 40/160 |
Bronzo |
400÷690T |
5,5 |
4 |
9,6÷5,5 |
2800 |
800 |
37 |
|
B-CN 50/125 |
Bronzo |
400÷690T |
5,5 |
4 |
9,6÷5,5 |
2800 |
1300 |
24 |
|
B-CN 65/160 |
Bronzo |
400÷690T |
10 |
7,5 |
14,3÷9,2 |
2800 |
2000 |
26 |
|
B-CN 80/160 |
Bronzo |
400÷690T |
20 |
15 |
27,3÷15,8 |
2800 |
3000 |
34 |
CONSTRUCTION FEATURES
- Pump body: BRONZE
- Motor support: BRONZE
- Impeller: BRONZE
- Shaft: AISI 316 Stainless steel
- Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof)
MOTOR
- Direct Current:
Permanent magnet electric motor 12/24V, Protection IP23, Insulation Class F, Continuous Duty (S1). - Alternate Current:
Induction electric motor, 230V single-phase (M) / 230÷400V / 400÷690V three-phase (T), 50Hz, Protection IP55, Insulation Class F, Continuous Duty (S1).
SCOPE
- Liquid free of solid impurities
- Temperature range of the liquid: from + 0 to + 90 °C.
- Max. suction depth: 7 m
- Static pressure inside the pump body: 6 bar max.
230M, 50Hz: single-phase alternate current
230÷400T, 400÷690T, 50Hz: three-phase alternate current
Available on request other voltages at 50Hz and 60Hz.
Be the first to review “CEM B-CN marine centrifugal pump”
Related Products
-
Read moreQuick ViewCEM AM self priming centrifugal pumps
CEM AM serie includes self priming centrifugal electric pumps made in bronze (slow priming) capable of transfer or supply large flow of liquid. They are widely used in the nautical sector to empty bilges, fire-fighting equipment, ballast, washing of decks and chains and air conditioning systems. The particular impeller shape allows the transferring of liquid with small solid parts in suspension.
CONSTRUCTION FEATURES
- Pump body: BRONZE
- Motor support: BRONZE
- Impeller: BRONZE
- Shaft : AISI 316 STAINLESS STEEL
- Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof)
See below models and performances
Read moreQuick View -
Read moreQuick ViewElectronic pressure control 12/24V – EPC
EPC controls automatically the start and stop stages when the pressure drops or when the water supply to the system is interrupted.
- Voltage: 12/24V D.C.
- Inlet/Outlet: male 1″
- Special non return valve avoid surges
- Security system avoiding the possibility for the machine to work without water (Dry running control)
Read moreQuick View -
Read moreQuick ViewCEM SBM rotary self-priming volumetric pumps
SBM serie is a rotary self-priming volumetric electric pump widely used in the nautical sector for emptying waste tanks, toilet sewage, particularly viscous, oily fluids or liquids with small solid bodies in suspension.
CONSTRUCTION FEATURES
- Pump body: AISI 316 STAINLESS STEEL
- Shaft : AISI 316 STAINLESS STEEL
- Impeller options: NEOPRENE (CR) for sea water and non-oily liquids
- NITRILE (NBR) for oil and diesel oil
- Mechanical seal: STEEL-GRAPHITE-NBR (special corrosion-proof).
See below models and performances
Read moreQuick View -
Read moreQuick ViewCEM SBX marine single screw self-priming pump
CEM SBX serie is a single screw self-priming pump made in STAINLESS STEEL AISI 316 equipped with a single screw made in stainless steel AISI 316 that running inside in a NBR rubber stator. These pumps are widely used in the nautical sector to emptying waste tank , toilet sewage and particularly viscous liquids with small solid bodies in suspension.
CONSTRUCTION FEATURES
- Pump body: STAINLESS STEEL AISI 316
- Shaft : AISI 316 Stainless Steel
- Rotor: AISI 316 Stainless Steel
- Coupling: AISI 316 Stainless Steel – NBR
- Stator: NBR
- Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof)
See below models and performances
Read moreQuick View -
Read moreQuick ViewCEM JBR marine self-priming centrifugal pump
Self-priming centrifugal electric pump Jet type with closed impeller, featuring a high suction capacity, widely used to deliver pressurized water to on-board appliances (such as showers, kitchens ,washbasins, toilets, etc.), for air-conditioning units, fire–fighting, washing of decks and chains. JBR pump is suitable for both fresh and sea water.
CONSTRUCTION FEATURES
Pump body: AISI 304 STAINLESS STEEL
Shaft : AISI 316 (d.c.) – AISI 420 (a.c.) STAINLESS STEEL
Diffuser and Venturi tube: NORYL (Technopolymer)
Impeller/s: NORYL (Technopolymer).
Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof).See below models and performances
Read moreQuick View -
Read moreQuick ViewCalpeda pump B-C 41/1E 3ph
Centrifugal electric pump made in BRONZE widely used in the nautical sector to transfer and/or deliver fresh water and sea water to all the plants where a large flow rate is needed such as air conditioning, cooling, circulation etc.
Voltage: 230/400/50 Hz 3ph
Max. Delivery: 250 Lt/min
Max. Head: 19m.
Weight: 16.3 kg
Read moreQuick View -
Read moreQuick ViewCEM SBR marine single screw self-priming pump
Single screw self-priming pump made in BRONZE equipped with a single screw made in stainless steel AISI 316 that running inside in a NBR rubber stator. These pumps are widely used in the nautical sector to emptying waste tank, toilet sewage and particularly viscous liquids with small solid bodies in suspension.
Voltage: 12 – 24 – 230M – 230÷400TPower: 0,75 HP – 0,55 Kw
Max. Delivery: 50 Lt/min
Max. Head: 50m
Read moreQuick View -
Read moreQuick View
Calpeda pump B-C 41/A 3ph
Centrifugal electric pump made in BRONZE widely used in the nautical sector to transfer and/or deliver fresh water and sea water to all the plants where a large flow rate is needed such as air conditioning, cooling, circulation etc.
Voltage: 230/400V 3ph
Power: 1.1 kW
Max. Delivery: 250 Lt/min
Max. Head: 22.4 m
Weight: 19.2 kg
Read moreQuick View -
Read moreQuick ViewCEM 020 – 070 marine self priming pump (bronze)
CEM self-priming electric pumps 020-070 made in bronze with side liquid ring widely used in the nautical sector to empty bilges, fire-fighting and transfer liquids such as: fresh water, sea water, diesel-oil etc.
CONSTRUCTION FEATURES
- Pump body: BRONZE
- Impeller: BRONZE
- Pipe fittings: BRONZE
- Shaft: AISI 316 Stainless steel
- Mechanical seal: ceramics-graphite-NBR (special corrosion proof)
See below models and performances
Read moreQuick View -
Read moreQuick ViewCalpeda pump B-CM 20 or B-CM 20E
Centrifugal electric pump made in BRONZE widely used in the nautical sector to transfer and/or deliver fresh water and sea water to all the plants where a large flow rate is needed such as air conditioning, cooling, circulation etc.
Read moreQuick View
Reviews
There are no reviews yet.