CEM JBR marine self-priming centrifugal pump
Self-priming centrifugal electric pump Jet type with closed impeller, featuring a high suction capacity, widely used to deliver pressurized water to on-board appliances (such as showers, kitchens ,washbasins, toilets, etc.), for air-conditioning units, fire–fighting, washing of decks and chains. JBR pump is suitable for both fresh and sea water.
CONSTRUCTION FEATURES
Pump body: AISI 304 STAINLESS STEEL
Shaft : AISI 316 (d.c.) – AISI 420 (a.c.) STAINLESS STEEL
Diffuser and Venturi tube: NORYL (Technopolymer)
Impeller/s: NORYL (Technopolymer).
Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof).
See below models and performances
- Description
- Reviews (0)
Description
Self-priming centrifugal electric pumps Jet type with closed impeller, featuring a high suction capacity, widely used to deliver pressurized water to on-board appliances (such as showers, kitchens ,washbasins, toilets, etc.), for air-conditioning units, fire–fighting, washing of decks and chains.
Automatic operation is achieved by equipping the pumps with small or medium-sized surge tanks.
JBR pump is suitable for both fresh and sea water.
PERFORMANCES
| Model Type |
Material | Voltage (V) |
Power |
Absorption (A) |
Giri/min. RPM |
Max. delivery (l/min.) |
Max. head (m) |
|
| HP | kW | |||||||
| JBR |
Bronzo |
12 | 0,7 | 0,52 | 42 | 2200 | 44 | 30 |
| 24 | 0,8 | 0,6 | 28 | 2600 | 55 | 36 | ||
| 230M | 0,8 | 0,6 | 4,5 | 2800 | 55 | 52 | ||
| 230÷400T | 0,8 | 0,6 | 3÷1,7 | 2800 | 55 | 52 | ||
| JBR 2 | Bronzo Bronze |
24 | 1 | 0,75 | 45 | 2800 | 75 | 40 |
| 230M | 1 | 0,75 | 5,7 | 2800 | 75 | 42 | ||
| 230÷400T | 1 | 0,75 | 3,7÷2,2 | 2800 | 75 | 42 | ||
| JBR 3 | Bronzo Bronze |
24V | 1,5 | 1,1 | 60 | 2800 | 100 | 50 |
| 230M | 1,5 | 1,1 | 7,4 | 2800 | 100 | 50 | ||
| 230÷400T | 1,5 | 1,1 | 5÷2,9 | 2800 | 100 | 50 | ||
| JBR 4 | Bronzo Bronze |
230M | 2 | 1,5 | 9,2 | 2800 | 160 | 50 |
| 230÷400T | 2 | 1,5 | 7,5÷2,3 | 2800 | 160 | 52 | ||
| JBR 5 | Bronzo Bronze |
230÷400T | 3 | 2,2 | 9,1÷5,3 | 2800 | 160 | 60 |
CONSTRUCTION FEATURES
Pump body: AISI 304 STAINLESS STEEL
Shaft : AISI 316 (d.c.) – AISI 420 (a.c.) STAINLESS STEEL
Diffuser and Venturi tube: NORYL (Technopolymer)
Impeller/s: NORYL (Technopolymer).
Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof).
MOTOR
- Direct Current:
Wound field and permanent magnet electric motor 12/24V, Protection IP23, Insulation Class F, Continuous Duty (S1). - Alternate Current:
Induction electric motor, 230V single-phase (M) / 230-400V three-phase (T), 50Hz, Protection IP44-54, Insulation Class F, Continuous Duty (S1).
SCOPE
- Liquid free of solid impurities
- Temperature range of the liquid: from +0 to +70 °C
- Max. suction depth: 9 m.
- Static pressure inside the pump body: 6 bar max.
ACCESSORIES ON REQUEST
- Non-return valve 1” or 1” 1/2
- “Omega base” made in stainless steel with antivibrations
12V-24V: DIRECT CURRENT
230M, 50Hz: single-phase alternate current
230÷400T, 50Hz: three-phase alternate current
Available on request other voltages at 50Hz and 60Hz.
Be the first to review “CEM JBR marine self-priming centrifugal pump”
Related Products
-
Read moreQuick ViewImpeller for CEM pump B-CE 41/1 A
Read moreQuick View -
Read moreQuick ViewCEM SBX marine single screw self-priming pump
CEM SBX serie is a single screw self-priming pump made in STAINLESS STEEL AISI 316 equipped with a single screw made in stainless steel AISI 316 that running inside in a NBR rubber stator. These pumps are widely used in the nautical sector to emptying waste tank , toilet sewage and particularly viscous liquids with small solid bodies in suspension.
CONSTRUCTION FEATURES
- Pump body: STAINLESS STEEL AISI 316
- Shaft : AISI 316 Stainless Steel
- Rotor: AISI 316 Stainless Steel
- Coupling: AISI 316 Stainless Steel – NBR
- Stator: NBR
- Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof)
See below models and performances
Read moreQuick View -
Read moreQuick ViewCEM B-CN marine centrifugal pump
Centrifugal electric pumps made in BRONZE widely used in the nautical sector to transfer and/or deliver fresh water and sea water to all the plants where a large flow rate is needed such as: air conditioning, cooling and circulation etc.
CONSTRUCTION FEATURES
- Pump body: BRONZE
- Motor support: BRONZE
- Impeller: BRONZE
- Shaft: AISI 316 Stainless steel
- Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof)
See below models and performances
Read moreQuick View -
Read moreQuick ViewCEM PB marine peripheral pump (bronze)
CEM PB serie is a single-impeller peripheral electric pump capable of developing high pressure as compared to limited flow rate. This electric pump is widely used in the nautical sector to deliver fresh water or sea water, to wash decks and chains, or to deliver pressurised water to on-board appliances such as showers, washbasins, toilets, etc. Automatic operation is achieved by equipping the pump with small or medium-sized surge tank.
CONSTRUCTION FEATURES
- Pump body: BRONZE.
- Motor support: BRONZE.
- Shaft: AISI 316 STAINLESS STEEL.
- Impeller: BRASS ALLOY
- Mechanical seet: CERAMICS-GRAPHITE-NBR (special corrosion-proof)
See below models and performances
Read moreQuick View -
Read moreQuick ViewCEM ABR marine multi-stage self-priming pumps
Multi-stage self-priming electric pumps made of bronze fitted with radial impellers. These electric pumps are widely used in the nautical sector to empty bilges, fire-fighting washing of chains and for the transfer of oil. Installing a filter and non-return valve at the suction inlet recommended.
CONSTRUCTION FEATURES
- Pump body: BRONZE.
- Impellers: BRONZE.
- Pump cases and diffusers: BRONZE.
- Shaft: STAINLESS STEEL AISI 316.
- Mechanical seal: Ceramics-Graphite (special corrosion-proof).
See below models and performances
Read moreQuick View -
Read moreQuick ViewElectronic pressure control 12/24V – EPC
EPC controls automatically the start and stop stages when the pressure drops or when the water supply to the system is interrupted.
- Voltage: 12/24V D.C.
- Inlet/Outlet: male 1″
- Special non return valve avoid surges
- Security system avoiding the possibility for the machine to work without water (Dry running control)
Read moreQuick View -
Read moreQuick ViewSQUARE D Pressure switch
Safety manual resetting pressure switch “SQUARE D” for water pressure systems
Read moreQuick View -
Read moreQuick ViewCEM SBM rotary self-priming volumetric pumps
SBM serie is a rotary self-priming volumetric electric pump widely used in the nautical sector for emptying waste tanks, toilet sewage, particularly viscous, oily fluids or liquids with small solid bodies in suspension.
CONSTRUCTION FEATURES
- Pump body: AISI 316 STAINLESS STEEL
- Shaft : AISI 316 STAINLESS STEEL
- Impeller options: NEOPRENE (CR) for sea water and non-oily liquids
- NITRILE (NBR) for oil and diesel oil
- Mechanical seal: STEEL-GRAPHITE-NBR (special corrosion-proof).
See below models and performances
Read moreQuick View -
Read moreQuick ViewCEM J-INOX marine self-priming centrifugal pump
Self-priming centrifugal electric pump Jet type with closed impeller, featuring a high suction capacity, widely used to deliver pressurized water to on-board appliances (such as showers, kitchens ,washbasins, toilets, etc.), for air-conditioning units, fire–fighting, washing of decks and chains. J-INOX pump is suitable for fresh water.
CONSTRUCTION FEATURES
Pump body: AISI 304 STAINLESS STEEL
Shaft : AISI 316 (d.c.) – AISI 420 (a.c.) STAINLESS STEEL
Diffuser and Venturi tube: NORYL (Technopolymer)
Impeller/s: NORYL (Technopolymer).
Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof).Also available as water pressure systems with electronic control system EPC (Electronic pressure control system) or with tank
See below models and performances
Read moreQuick View -
Read moreQuick ViewCEM MG-INOX marine self-priming centrifugal pump
Self-priming centrifugal electric pump Jet type with closed impeller, featuring a high suction capacity, widely used to deliver pressurized water to on-board appliances (such as showers, kitchens ,washbasins, toilets, etc.), for air-conditioning units, fire–fighting, washing of decks and chains. MG-INOX pump is suitable for fresh water.
CONSTRUCTION FEATURES
Pump body: AISI 304 STAINLESS STEEL
Shaft : AISI 316 (d.c.) – AISI 420 (a.c.) STAINLESS STEEL
Diffuser and Venturi tube: NORYL (Technopolymer)
Impeller/s: NORYL (Technopolymer).
Mechanical seal: CERAMICS – GRAPHITE – NBR (special corrosion-proof).See below models and performances
Read moreQuick View
Reviews
There are no reviews yet.